Q-NOTE QN-7000HX Spécifications télécharger pdf (Page 7)

SMS 7000 Release Notes 3

Software, Hardware, and Firmware Required

■

No required ﬁrmware/hardware changes to Version

6.x

MCPU to in-

stall and run Version 6.41. Version 6.x to 6.41 is a software upgrade only.

On page 14 is a matrix of the appropriate versions of hardware (circuit

modules) for each Series 7000 Release.

Note

Whenever a circuit module or any part is updated to a new level,

the dash version of the part must be re-marked to keep service

records accurate. Re-ink or permanently label updated parts

with the new -xx version. Refer to the compatibility matrices in

Table 10 on page 9 of this document.

6.41 MCPU Upgrade Kit

If you are installing a Version 6.41 distribution for the ﬁrst time, you will be

using a 6.41 MCPU upgrade kit. The kits contain all ﬁrmware and hard-

ware required to upgrade a Version 3.0, 4.0, or 5.x system to Version 6.41.

Three upgrade kits are available:

■

Part number 170182-01, Upgrade from Version R3.x to R6.x

■

Part number 170183-01, Upgrade from Version R4.x to R6.x

■

Part number 170184-01, Upgrade from Version R5.x to R6.x

The contents of the kits are described in the following sections.

Upgrade Kit number 170182-01 is for 3.x to 6.41 upgrade.

Table 1. Version 6.x Upgrade Kit for 3.x to 6.41

Item Part Number Quantity Description

1 160135-00 2 per mcpu Preloaded 2 MByte FLASH Memory SIMMs

2 SC2813-00 1 per mcpu 80960CF E0 Step Microprocessor

3 052844-06 1 per mcpu MCPU Boot ROM

4 151026-01 1 per mcpu Flash ROM Memory Control Logic PLD

5 052874-04 1 MCPU Interrupt Controller PLD

6 FMN2546-00 1 per mcpu 470pf Mica Capacitor

7 FMN2522-00 1 per mcpu 470pf Mica Capacitor

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Pas de commentaire

Q-NOTE QN-7000HX Spécifications Page 7