System Requirements
page 4 OmniSwitch 6600/7000/8800—Release 5.1.6.R02
System Requirements
Memory Requirements
• OmniSwitch 6624 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is the
standard configuration shipped.
• OmniSwitch 6648 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is the
standard configuration shipped.
• OmniSwitch 6600-U24 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is
the standard configuration shipped.
• OmniSwitch 6600-P24 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is
the standard configuration shipped.
• OmniSwitch 6602-24 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is
the standard configuration shipped.
• OmniSwitch 6602-48 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is
the standard configuration shipped.
• OmniSwitch 7700 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is the
standard configuration shipped on a Chassis Management Module (CMM).
• OmniSwitch 7800 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is the
standard configuration shipped on a Chassis Management Module (CMM).
• OmniSwitch 8800 Release 5.1.6.R02 requires 128 MB of SDRAM and 32MB of flash memory. This is the
standard configuration shipped on a Chassis Management Module (CMM).
Configuration files and the compressed software images—including web management software
(WebView) images—are stored in flash memory. Use the show hardware info command to determine
your SDRAM and flash memory.
Miniboot, BootROM, and FPGA Recommendations
Note: The diagnostic image version is different from the version of the operational images. The diagnos-
tic image is derived from independent software and not tied to software features or release cycles, but to
hardware production schedules.
OmniSwitch 7000/8800
• Miniboot: 5.1.5.340.R01
• BootROM: 5.1.5.340.R01
• FPGA: 44 (recommended)
OmniSwitch 6600
Note: The following Miniboot and BootROM upgrades are for manufacturing purposes only. They are
used to support the SST BootROM chip. A field upgrade is not needed for 5.1.6.R02. The Miniboot
5.1.2.2.R01 and BootROM 5.1.4.128.R01 are sufficient at this time.
• Miniboot: 5.1.5.115.R02
• BootROM: 5.1.5.115.R02
Commentaires sur ces manuels