Q-NOTE QN-7000HX Guide de l'utilisateur télécharger pdf (Page 86)

Open Problem Reports and Feature Exceptions

page 86 OmniSwitch 6600/7000/8800—Release 5.1.6.R02

PR 84425

The Drop rule is still enforced when the source MAC or source VLAN is changed in a secure switch

access condition on an OS6600 series switch.

Workaround: There is no known workaround at this time.

PR 90119

On an OS7000 series switch, Ethertype based conditions will only affect Ethernet II encapsulated packets.

Workaround: There is no known workaround at this time.

PR 90141

On an OS6600 series switch, the DSCP to priority table is not being updated correctly. Thus, the user

cannot change the priority of a flow based on its TOS value.

Workaround: Use the DSCP value to change flow priority (e.g., policy condition c dscp 30).

PR 92153

When a switch is only bridging a packet that is routed by an external router, and when this routed packet

has to go through the same NI from where it originated before reaching its final destination, the following

symptom can be seen: If "QoS ClassifyL3 bridged" is enabled, the NI's HRE learns the IP Source Address

on two different ports, and therefore the packet never reaches its destination. Please refer to TechTip 2077

for more details.

Workaround: Use a different NI to connect the external router, or disable "QoS ClassifyL3 bridged" on

the switch. Please refer to TechTip 2077 for more details.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 114 115

Pas de commentaire

Q-NOTE QN-7000HX Guide de l'utilisateur Page 86