Q-NOTE QN-7000HX Guide de l'utilisateur télécharger pdf (Page 55)

Open Problem Reports and Feature Exceptions

OmniSwitch 6600/7000/8800—Release 5.1.6.R02 page 55

PR 81937

With the optimization enabled command, it is impossible to delete a port from link aggregate.

Workaround: Disable the optimization command to delete the ports from link aggregate and re-enable

the optimization command.

PR 81985

On an OS8800 switch, LACP ports do not join the aggregate if some of the ports are administratively

down.

Workaround: If the ports need to be administratively down and if they are part of LACP link aggregate,

remove the ports from LACP and add them again when they admin up.

PR 84225

On an OS7000 series switch, multiple link aggregate on the same VLAN should be on the same flooding

mode if optimization is enabled to pass bridging traffic between them.

Workaround: Do not create mixed mode link aggregate ports in the same slice.

PR 84437

On OS8800 first generation NI modules, there could be MAC movement across the link aggregate ports

and the user ports.

Workaround: Enable the optimization mode on link aggregation modules.

PR 90656

On an OS7000 series switch, if the same actor admin key is assigned for two different dynamic link aggre-

gates, ports could join the wrong aggregates.

Workaround: Assign unique actor parameters for each configured dynamic link aggregate.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 114 115

Pas de commentaire

Q-NOTE QN-7000HX Guide de l'utilisateur Page 55