Q-NOTE QN-7000HX Guide de l'utilisateur télécharger pdf (Page 82)

Open Problem Reports and Feature Exceptions

page 82 OmniSwitch 6600/7000/8800—Release 5.1.6.R02

PR 61072

Simple NAT rules, on an OS7000 series switch that have conditions whose IP address/subnet overlaps

with switch addresses, will match traffic sent from these addresses even if the traffic is bridged.

Workaround: Along with the generic NAT rule, a higher precedence, non-NAT rule must be added to

match traffic from the switch addresses that overlap with the generic NAT rule.

For instance, if you wanted to remap the subnet 124.10.10/24 to 60.0.0.2, but also had a switch address of

124.10.10.5, you would have two rules:

policy condition nat source ip 124.10.10.0 mask 255.255.255.0

policy action nat destination rewrite ip 60.0.0.2

policy rule nat condition nat action nat precedence 100

policy condition exception_ip source ip 124.10.10.5

policy action accept disposition accept

policy rule exception condition exception_ip action accept precedence 200.

PR 61874

Destination Port and Destination Interface Type policies are not supported across link aggregation using

QoS Policy on an OS7000 series switch.

Workaround: There is no known workaround at this time.

PR 63285

TCP/UDP fragment classification is not supported on an OS7000 series switch.

Workaround: There is no known workaround at this time.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 114 115

Pas de commentaire

Q-NOTE QN-7000HX Guide de l'utilisateur Page 82